A narrow board on a small sample panel can be a poor comparison for a wide board on a much larger panel. What difference caught the dealer’s attention: the board size or the amount of pattern on show? For herringbone flooring plank width, an equal display area makes that question easier to answer before samples are ordered.
The selection might call for a compact repeat or a broader board face. But the dimensions need a second look: a board measuring 450 mm by 75 mm has a different proportion from one measuring 600 mm by 92 mm. Choosing a wider- width plank does not necessarily yield a less slender rectangle.
Selection points
- Keep the displayed area and viewing distance consistent.
- Read length and width together before ranking samples.
- Compare format first, then resolve the colour and finish of the actual product.
img.Herringbone Flooring Plank Width Comparing Dealer Display Samples.webp
Compare width together with length
En YEHUI herringbone range offers several oak formats for dealers to compare. The R, JR and S series provide different plank proportions, from narrower, more elongated boards to wider formats. This allows buyers to evaluate how board proportions influence the overall herringbone pattern and choose a format that suits their intended display.
The length-to-width ratios below provide a clearer way to compare these formats. They describe the proportions of each plank rather than its quality or performance.
| Fixed format | Oak examples | Longitud | Ancho | Length-to-width ratio |
| R | R1101, R1106, R1502 | 450 mm | 75 mm | 6.00:1 |
| JR | JR9110, JR9111 | 600 mm | 92 mm | About 6.52:1 |
| S | S6001, S6005 | 600 mm | 124 mm | About 4.84:1 |
The 75 mm option: a shorter board as well
YEHUI offers several additional oak options within the same R-format range, including R1506, R1507 and R1611, as well as R6003, R6601, R6602 and R6605. This gives dealers more flexibility to compare different wood tones and grain patterns while keeping the same plank proportions across their display samples.
On an equal-area display, the shorter, narrower rectangle creates a different repeat from either 600 mm option. That makes it a useful starting point when a dealer wants to compare a finer pattern scale. Whether the resulting display feels too detailed is a selection judgement, best made with the actual samples in front of the buyer.
The 92 mm option: wider, but more slender in proportion
YEHUI also lists oak models JR9113 and JR9115 at 600 mm by 92 mm. They share the length and width of JR9110 and JR9111. Within this JR selection, a change of model does not necessarily mean a change of board format.
The JR rectangle is wider than the R rectangle, yet its length-to-width ratio is higher. Calling it simply “the wider herringbone” misses that distinction. For a display buyer, the longer outline may be as important as the extra width.
The 124 mm option: compare directly with 92 mm
YEHUI’s S6006 and S6008 are oak models listed at 600 mm by 124 mm, alongside S6001 and S6005. These S examples retain the JR length while using a broader board face. They give the buyer a fixed-format comparison in which the listed length stays constant.
That is the clearest pair for examining the effect of width. JR and S differ by 32 mm across the board, with both listed at 600 mm long. The comparison can stay focused on how much of the display each board face occupies, without a simultaneous change in board length.
img.herringbone-dealer-display-widths.webp
Keep the display footprint the same
For physical panels, the dealer can specify one outer display size for all the candidates. Imagine one sample showing little more than a junction and another showing several complete repeats. A preference for the second tells the purchasing team very little about width. There is simply more pattern to examine.
Standardize Sample Scale and Viewing Conditions
Photographs create another trap. Two images may arrive as matching squares, although the photographer stood much closer to one sample. Resizing the files cannot restore the missing scale. A visible scale reference and a consistent camera position give showroom staff something firmer to work with when the physical panels are elsewhere.
Simple rectangular outlines, drawn at one scale, are enough for a first pass through the formats. Without grain or colour, the shape is easier to isolate. The chosen outlines can then be compared with physical samples. At that point the buyer is judging a finished surface as well as a rectangle.
The intended display position belongs in the discussion. Close inspection at a desk and a view from across a showroom aisle answer different questions. Both views are useful, provided every candidate gets the same treatment. If only loose pieces are available, a full-size paper outline can mark out the proposed display area.
For dimensions in the sample request, NIST’s guidance on expressing quantities supports clear numerical values and unit symbols. Separate columns headed length and width, both in millimetres, are less ambiguous than an unlabelled string of figures. The display dimensions should have their own fields so they cannot be mistaken for board dimensions.
Separate the format decision from the finish decision
A pale panel beside a dark one is already a colour comparison. The buyer may choose a shade and later remember choosing a width. Oak examples are available across R, JR and S, so there is no need to change species for this first comparison. Still, “oak” does not mean the surfaces will match.
Compare Oak Finishes After Shortlisting the Format
YEHUI’s oak collection offers a range of visual styles across its R, JR and S formats. Within the R series, R1101 features a warm golden tone, R1506 has a grey-brown appearance, R1502 is lighter, and R6003 shows darker brown coloring with prominent grain. The JR and S options provide further variety, with JR9110 and JR9111 offering warm and greyish tones, while S6001 and S6006 contrast a grey finish with a deeper brown appearance. These descriptions reflect the product images and should be used as initial selection references rather than confirmed color tolerances for bulk orders.
En herringbone flooring selection can help identify candidates for that first request. A product such as Suelo de herringbone de roble naturaleza still needs to be tied to its exact model and offered specification before becoming the reference sample. A descriptive product name alone does not identify a particular R, JR or S format.
Once the formats have been shortlisted, attention can move to their offered finishes. The decision record needs to say what won approval. Was it the proportion alone, or the complete product including its colour and surface? A photograph stamped “approved” does not answer that question for the next person handling the order.
img.Oak Nature Herringbone flooring.webp
Turn the comparison into a sample order
YEHUI provides product consultation and support for design, measurement and sampling. Its customization service considers the buyer’s budget, preferred style, dimensions and requirements. Those services give a dealer a starting point for discussing a display comparison; the exact sample arrangement remains part of the enquiry.
YEHUI’s production includes cutting, fine sanding and sizing, with both machine and manual inspection. Dimensions and thickness are among the aspects checked. For the dealer, the relevant follow-up is the specification of the actual sample offered; the general production process does not identify it.
Model codes and proposed dimensions give the supplier a concrete starting point. Alongside them, the request can describe the equal-area comparison and identify the colour and finish wanted for each sample. A request for loose boards is different from a request for assembled panels. The supplier needs to confirm what can be provided, at what size and on which terms.
Questions before a display selection
Is there one standard herringbone plank width?
The R, JR and S examples use different fixed widths. A dealer should specify the model and its complete dimensions instead of ordering an undefined “standard” herringbone sample.
Does a larger ratio mean a better display?
No. It means the rectangle is longer relative to its width. The preferred proportion depends on the dealer’s intended presentation, and a ratio cannot describe the finish or grain.
The sample enquiry can end with the shortlisted R, JR or S codes, the proposed display footprint and the remaining appearance choices. The supplier’s reply should address that shortlist so the dealer can make the next decision without starting the comparison again.